Support Grist
Support nonprofit, independent environmental journalism.
Donate to Grist.
Ask Umbra

Heating Elements

On home heating

By Umbra Fisk
18 Apr 2007
Tools: print | email | discuss | write to the editor | subscribe | RSS
Got questions about the environment? Ask Umbra.
Got questions about the environment? Ask Umbra.
question Hi Umbra,

My fiancée and I bought a house in October. We plan to green the house up as best we can, and one of our first projects will be how we heat the house. Since we didn't have any money after buying, we had to limp through this winter with an oil-powered steam boiler from 1962. Obviously not efficient at all. Plus it was having "puff back" issues so part of the time our basement was filled with lovely oil smoke. What should we do to replace this boiler? I know there is natural gas in the street so we could have the whole system replaced. Or should we look at alternatives such as biofuel and a new oil boiler? Or are there other options that I don't know about?

Jesse
Wayland, Mass.

answer Dearest Jesse,

Oily boiler toil and trouble, that's what you've got. (If I don't start with a joke they dock my weekly M&M's allowance.)

You look radiant.
You look radiant.
Photo: iStockphoto
Let's assume that you'll replace your boiler, although if there is any doubt, call in a technician. Yours is so old that it would be shocking if it were as efficient as modern models. Furnace and boiler efficiency are measured in AFUE (gesundheit): annual fuel utilization efficiency. This is a measurement of how much of the energy is turned into heat, versus how much leaks out or vents off as waste. Modern furnaces and boilers have AFUEs above 80 or even 90 percent; older types often fall below 70 percent. Lord knows what your boiler is, other than a hilarious relic, but others of us who don't have Puff the Dragon in the basement can learn our AFUE either from a label, from a professional, or from learning the combustion efficiency from a professional and then multiplying by 0.85.

I can't find one heating system that is touted as best in all situations, which is logical, since your electricity comes from coal and mine from hydro, your house may have three finished floors and other people have exposed pipes in the basement -- It Depends. The web is here for you, though, and I've picked the U.S. Department of Energy's Energy Efficiency and Renewable Energy site and the government of Ontario for your preliminary decision-making; for lists of the best furnaces/boilers, the American Council for an Energy-Efficient Economy. The EERE and Ontario are thorough, laying out all the choices and assisting you with charts, decision-making tips, contractor assistance, thoughts on fuel costs and environmental impact, and generally overwhelming (but useful) amounts of information. Fuel costs, installation costs, the infrastructure and layout of your home, and various soon-to-be-revealed other limitations will hopefully winnow your choices down until you know which system is best for you.

The simplest thing is probably and obviously to replace the current system with an updated version. Then, if you have biofuel available in your area (which you do), you can look into using that in your boiler instead of heating oil and do a little petroleum sidestepping if it works out. That's a great option if it's available to you. Natural gas burns cleaner than oil (or wood, pellets, or propane), so if the costs and boiler efficiencies work out, changing your fuel source to natural gas might make sense. Other common energy sources include solar, heat pumps, wood or pellet-fueled stoves or furnaces, and electricity. Electricity in your area is probably coal-generated and not so clean.

A drawback to deciding on any system other than a steam boiler is that you'll have to replace the infrastructure that delivers the heat to the "conditioned" spaces. If you switch to a hot-water boiler in order to have hot-water radiators (one reason to make this choice is that hot-water boilers are apparently more efficient than steam), you will have to futz with the radiators if not outright replace them, and you may have to replace the pipes. If you wanted radiant floor heating and your joists aren't exposed underneath, forget it. If you switch to a furnace and a forced-air system, you'll need to install ducting and grates all over the house -- I've learned from EERE that a reason to consider doing this is to have air conditioning as part of your central heating/cooling system.

In sum, yes, there are other options you haven't heard about, and you should look into it because I can't even begin to do the topic justice. Set aside a good chunk of time to do so. When you do purchase a new heating system, be sure it is properly sized for your home. And before you have someone size your furnace or boiler, you want to do all the efficiency improvements, such as insulation, that reduce the BTUs required to heat your home. That's what you want to do. Whether you will have the time and money to do it, who knows?

Flexibly,
Umbra



Tools: print | email | discuss | write to the editor | subscribe | RSS
Yours is to wonder why, hers is to answer (or try). Please send Umbra any nagging question pertaining to the environment -- but first check out her FAQs!
The claims made in this column may not reflect the views of this magazine. Neither the magazine nor the author guarantees that any advice contained in this column is wise or safe. Please use this column at your own risk.
Umbra Fisk is Grist Research Associate II, Hardcover and Periodicals Unit, floors 2B-4B.
< Previous | Next >
Comments: (14 comments)

You are not logged in. Thus, you cannot post a comment. If you have a Gristmill account, log in below. If you don't have a Gristmill account, well, by all means go make one! Meet you back here in five.

Username: Password:

Forgot your password? Enter your username and click:

Heating Elements

Jesse,

Don't fret!  There are tons of options that are great.  And don't hold out: radiant flooring IS a possibility.  Let's talk....

But Umbra's summary is right on.  

"There's a fine line between standing on the shore fishing and looking like an idiot" - Dave Barry

A Cleaner Greener Home Heating Option

This is a great response. Homeowners do have afforable and green choices! If you are looking for Bio Heating Oil (a blend of Biodiesel and regular heating oil) to heat your home in Mass you can learn more about Mass Energy BioHeating Oil .

Mass Energy Consumers Alliance is a non-profit organization that provides affordable and sustainable heating and electricity options through out the state.

Funny

I'm going to the permit office tomorrow to see if I can get my radiant floor design approved.  This is on a 72-year-old house.  The secret is: you can remove your ceilings, they're not structural members of the house.  It's messy and ugly, but in the end you'll have more efficient, more comfortable heat.  I hope.

As for insulation, windows and doors are a no brainer.  Also consider slow rise foam for your exterior walls - imagine having R-30 walls.  That's a lot of heat (or cool air) saved.

Reduce demand first!

The best energy is the one you don´t use!

If you buy a new heat generation system first, it will be oversized in the future, after you insulate your house. Oversized equipment is always less efficient than one sized correctly. So you would overpay twice: for a too large system and for comsumption of energy that is higher than needed (because of the lower efficiency) over the whole lifetime of the new equipment!

As Umbra wrote, the number of options are very large, so it´s best to invest some money hiring a specialized consultant who will make you a complete project, starting with the reduction of demand, which will consist mostly of insulation measures.

You should also ask around and search the Internet for possible financial asssistance and/or subsidies to do a complete energy savings project.

Have fun!

geothermal heat pump

I was surprised not to see geothermal heat pumps mentioned. We are in the process of installing one at our house on the grounds that (if the EPA is to be believed) they are the most efficient system in the overall use of external energy sources.

That is, if I compare the amount of oil I would use in my oil furnace with the amount of oil the utility would use to make enough electricity for my heat pump,  the utility will use less.

Incidentally, my preconception was that we could
not drill the wells because of being in the city,
but I was wrong.

I understand the problem that electrical generation can be noxious, but that is a separate battle for all of us to fight with the utility companies and the government.

Or to think outside the electric box...

...how about a corn-burning stove?  It's like ethanol without the middleman - practically zero-carbon, and from what I hear (I'm not an expert) clean-burning.

See: http://tinyurl.com/2m4538

If I were starting from scratch, that's probably what I'd go for.

Back Puffing and Boiler hyjinx

Back Puffing on an oil fired furnace or boiler is a "Surefire" indicator of a lack of air to the combustion system. You need a supply of Combustion Air as long as you keep this working in your home. This is a big safety concern and needs to be addressed right away! Call a Heating Contractor NOW!

Any new equipment you get should be of a direct vent design, providing a direct supply of combustion air from the outside into the combustion chamber, and a direct exhaust to the exterior. In both cases two or three inch PVC pipe can be used for venting.

When deciding on upgrading your heating system (You will want to move from the steam boiler as you will not want to tolerate the low efficiency with the peak efficiency available now and in the future being only about 83%) you will need to have the distribution system assessed for possible conversion to hot water.

If you have a single pipe steam system, then it is total replacement time!

Replacement of everything is not always needed. If you have a two pipe steam system then a possible conversion including a reworking of the existing radiators is possible.

You may have to replace the piping and this can be done with pex type piping , the same used for infloor radiant heat. This can be run through the interior of walls to the radiator locations with out as much destruction as one might think.

I like radiators as you can get better zone control with little perks like a radiator for a bathroom that also serves as a towel warmer! You can keep the bathroom cooler with a warm towel to dry with!

A new boiler can also be used to heat your tap water and Solar can be added to this  as well.

geothermal heat pump

geothermal heat pumps are not always the greenest option.  I can only speak to cold climate conditions.
When I say cold, not that mamby pamby stuff of 10 or 15, rather -15 to -30.

  1. Efficiency in the building reducing the need to heat and cool is the BEST investment.

  2. depending on your fuel mix and Location  chances are the high efficiency gas heating equipment will end up with a net lower greenhouse gas emissions than a ground source heat pump as well as provide a better return in investment.


As per others ...

  1.  INSULATE! INSULATE!! ... BUT FIRST AIR SEAL!!! Get the house "efficient" in terms of usage as the first step.  This is an integrated process.

  2.  Re heating ... there are so many options.

  • If steam/radiant, consider the value of solar hot water as the feedstock. This will lower the energy required to heat up the water to required temperatures for heating.  (And, if radiant as a choice and the option is available, dig down a reservoir for storing solar heat from summer for winter purposes.) The solar option thus picks up probably 70+% of the annual hot water heating demand.

  • Natural Gas: In the Northeast, definitely worth checking out a combined-heat power system.  (Such as the Micro-CHP system from Honda / Climate Energy. (http://www.hondanews.com/categories/1048/releases/3822)

  • If you have an air conditioning requirement (not common in MA), can consider a 'fossil fuel system' combining high-efficiency Heat Pump (mine, SEER 16+) with a high-efficiency gas furnance.  With a good controller/thermostat, system switches between the two for the most fuel (and/or cost) efficient option for heating.  (And, this creates a mixed gas/electric option for heating.)

  • Solar passive:  Any ability to build back in solar passive heating?

But, to go back, SEAL LEAKS & INSULATE (which, by the way, slow rising foam does both ...) to reduce overall requirements.

Key question for anyone looking to replace a heating system on an old home:  Have they had a home energy audit? (A good start is Home Energy Diet (see my review at: http://www.ecotality.com/blog/2007/energy-bookshelf-1-put ... )

Blogging regularly at Get Energy Smart. NOW!!! to Energize America .

first, get the thing serviced/ tuned up/cleaned

I speak as oil burner owner, hot-water baseboard.
That's it--then compare alternatives

Oil Tank

If you have a underground oil tank I would have it removed first.  If it leaks it going to cost a lot of money.

Nostalgia

Your story reminded me of the experience close friends had with an unexpected leak.  My advice is check your attic as well as your basement. Unforeseen surprises may await you in unexpected places.

Positive change begins with each of us
Radiant Panels

  Several years ago, I replaced my hot water radiators in the upstairs rooms with radiant heat panels on the ceiling.  i also insulated the interior walls and have a thermostat in each room.  this way, only the rooms being used need to be heated.  Even though I was switching from natural gas to electricity (And LI has the highest electrical rates in the country!) I saved $200 in heating costs in the first winter.
You can turn these panels on and off just like your lights.  There are no moving parts, installation costs are minimal, they are 95% effecient (as opposed to the gas burner which is only 84%) and they are comfortable! I am getting ready to do the rest of the house this spring. check out http://sshcinc.com/BarNone2.htm

sanjo
heating water

I'm surprised that no one has mentioned a solar (thermal) hot water system as a solution for Jesse.

A solar system with an adequately sized storage tank, placed in the basement, could meet not only his heating needs but also provide his domestic hot water (and heat his hot-tub to boot).

If he "backed up" his solar thermal system with a Bosch or Takagi variable flame tankless water heater, which are very efficient, he'd be "greening up" on several fronts AND solving his boiler problem.

You are not logged in. Thus, you cannot post a comment. If you have a Gristmill account, log in below. If you don't have a Gristmill account, well, by all means go make one! Meet you back here in five.

Username: Password:

Forgot your password? Enter your username and click:

The comments of Grist users reflect the opinions of those individuals only, and do not necessarily reflect the viewpoints of Grist, its staff, its board members, their psychotherapists, or their aestheticians. Got it?


Also in Grist

The Week's Most Popular
From the Archives
Stop It, by Umbra Fisk. On wine corks.
Don't Get Rattled, by Umbra Fisk. On baby gifts.
Drip Drop, by Umbra Fisk. On water conservation.

ADVERTISING POLICY


About Grist | Support Grist | Jobs Board | Archives | Grist by Email | RSS | Podcasts
Gristmill Blog | In the News | Ask Umbra® | Muckraker | Victual Reality | 'Tis the Season | The Grist List | The Bottom Line



Grist: Environmental News and Commentary
a beacon in the smog (tm) ©2007. Grist Magazine, Inc. All rights reserved. Gloom and doom with a sense of humor®.
Webmaster | Privacy Policy | Terms of Service | Trademarks